Services
Section menu here
EXTERIOR DFP : Unsanded Grades
SELECT TIGHT FACE
Characteristics:
Surface openings shall be filled. May be cleaned and sized (C&S)
Typical Applications:
Underlayment and combined subfloor and underlayment. Hoarding. Construction use where sanded material not required.
Look for our "Mark of Excellence"
The CANPLY "Mark of Excellence" is an assurance to consumers that our plywood meets the high quality standards established by the industry and that it will perform in a satisfactory and predictable manner. Only plywood manufactured by member companies of CANPLY are licensed to use this stamp.
| Plywood Grades | Veneer Grades | ||
| Face | Inner Plies |
Back | |
| Sanded | |||
|---|---|---|---|
| Good Two Sides | A | C | A |
| Good One Side | A | C | C |
| Unsanded | |||
| Select Tight Face (SEL TF) |
B* | C | C |
| Select (SEL) | B | C | C |
| Sheathing (SHG) | C | C | C |
| Overlaid | |||
| Medium Density Two Sides (MDO2) | C* | C | C* |
| Medium Density One Side (MDO1) | C* | C | C |