EXTERIOR POPLAR/ASPEN: Unsanded Grades

Sheathing

Characteristics:

Unsanded. Face may contain limited size knotholes and other minor defects.

Typical Applications:

Roof, wall and floor sheathing. Hoarding. Packaging. Construction use where sanded material is not required.

Look for our "Mark of Excellence"

The CANPLY "Mark of Excellence" is an assurance to consumers that our plywood meets the high quality standards established by the industry and that it will perform in a satisfactory and predictable manner. Only plywood manufactured by member companies of CANPLY are licensed to use this stamp.

CANPLY Assurance of Quality:

CANPLY member companies warrant their certified plywood against manufacturing defects including delamination. Please see specific manufacturer's warranty for details.

Need Plywood? Get a Quote Direct from CANPLY Mills

Use the Plywood Enquiry Form to obtain a quote from CANPLY Member Companies.

Note: A minimum order of 20 bundles is required. Click here

 

 

 

 

 
 

 
 
Plywood Grades Veneer Grades
  Face Inner
Plies
Back
Sanded
A-A
A C A
A-B
A C B
A-BB
A C BB
A-Industrial
A C IND
A-Utility
A C C*
A-C
A C C
B-B
B C B
B-BB
B C BB
B-Industrial
B C IND
B-Utility
B C C*
B-C
B C C
B-BB
BB C BB
BB-Industrial
BB C IND
BB-Utility
BB C C*
BB-C
BB C C
Industrial-Two Sides
IND C IND
Industrial-Utility
IND C C*
Industrial-One Side
IND C C
Utility-Two Sides
C* C C*
Utility-One Side C* C C
Unsanded
Select +  SEL C C
Standard Sheathing C C C
Overlaid
Medium Long Density Two Sides (MDO2) C* C C*
MediumDensity Overlaid One Side
(MDO1)
C* C C

For further details of veneer grade descriptions, refer to CSA Standard O153-M1980
+Select sheathing may be touch sanded
* Permissible openings filled.

 

Sizes & Thicknesses CANPLY EXTERIOR Plywood

Thicknesses Sizes
Sanded Sheathing

Lengths
Available up to 2500 mm

Widths
Available from 600 mm to 1250 mm

For EASY T&G panels, deduct 15 mm from the nominal width for net face coverage.

6 mm
8 mm
11 mm
14 mm
17 mm*
19 mm*
21 mm*
24 mm*
27 mm*
30 mm*

7.5mm
9.5 mm
11 mm*
12.5 mm*
15.5 mm*
18.5 mm*
20.5 mm*
22.5 mm*
25.5 mm*
28.5 mm*
31.5 mm*

All thicknesses are metric, but some approximate imperial dimensions eg 6mm (1/4 in.)
* Available as square edge or with EASY T&G edge.

Note: CANPLY EXTERIOR plywood panels are available in additional sizes and thicknesses on special order.