Face

Back

Why Plywood?
Plywood outperforms all other panels on the market:
· Highly Stable
· Stronger & Lightweight
· Impact Resistant
· Proven Performance
· Environmentally Responsible
· Value Added
Plywood Technical Data
Plywood Engineering Properties and Design Values
EXTERIOR POPLAR/ASPEN: Unsanded Grades
Select Sheathing
Characteristics:
Unsanded. Face may contain limited size knotholes and other minor defects.
Typical Applications:
Roof, wall and floor sheathing. Hoarding. Packaging. Construction use where sanded material is not required.
Look for our "Mark of Excellence"
The CANPLY "Mark of Excellence" is an assurance to consumers that our plywood meets the high quality standards established by the industry and that it will perform in a satisfactory and predictable manner. Only plywood manufactured by member companies of CANPLY are licensed to use this stamp.
CANPLY Assurance of Quality:
CANPLY member companies warrant their certified plywood against manufacturing defects including delamination. Please see specific manufacturer's warranty for details.
Need Plywood? Get a Quote Direct from CANPLY Mills
Use the Plywood Enquiry Form to obtain a quote from CANPLY Member Companies.
Note: A minimum order of 20 bundles is required.
Click here
| Plywood Grades | Veneer Grades | ||
| Face | Inner Plies |
Back | |
| Sanded | |||
|---|---|---|---|
| A-A |
A | C | A |
| A-B |
A | C | B |
| A-BB |
A | C | BB |
| A-Industrial |
A | C | IND |
| A-Utility |
A | C | C* |
| A-C |
A | C | C |
| B-B |
B | C | B |
| B-BB |
B | C | BB |
| B-Industrial |
B | C | IND |
| B-Utility |
B | C | C* |
| B-C |
B | C | C |
| B-BB |
BB | C | BB |
| BB-Industrial |
BB | C | IND |
| BB-Utility |
BB | C | C* |
| BB-C |
BB | C | C |
| Industrial-Two Sides |
IND | C | IND |
| Industrial-Utility |
IND | C | C* |
| Industrial-One Side |
IND | C | C |
| Utility-Two Sides |
C* | C | C* |
| Utility-One Side | C* | C | C |
| Unsanded | |||
| Select + | SEL | C | C |
| Standard Sheathing | C | C | C |
| Overlaid | |||
| Medium Long Density Two Sides (MDO2) | C* | C | C* |
| MediumDensity Overlaid One
Side (MDO1) |
C* | C | C |
For further details of veneer grade descriptions, refer to CSA Standard
O153-M1980
+Select sheathing may be touch sanded
* Permissible openings filled.
