Products
EASY T&G Roof
EASY T&G Floor
United States T&G Floor Profile
Request Quote on Plywood

Look for our "Mark of Excellence"

The CANPLY "Mark of Excellence" is an assurance to consumers that our plywood meets the high quality standards established by the industry and that it will perform in a satisfactory and predictable manner. Only plywood manufactured by member companies of CANPLY are licensed to use this stamp.

CANPLY Assurance of Quality:

CANPLY member companies warrant their certified plywood against manufacturing defects including delamination. Please see specific manufacturer's warranty for details.

 

 

CANPLY EASY T&G profiles should NOT be mixed with any other T&G panels. Risks in mixing T&G profiles that do not exactly conform to the patented characteristics, shape, and dimensional tolerances of EASY T&G are:

  • Inexact fit between panel tongue and groove edges that defeat design attributes
  • Unmatched profile indexes that prevent a uniform, ridge free surface
  • Squeaking at panel joints
  • Voiding of expressed or implied warranties
  • Irreparable customer dissatisfaction

 


Why Plywood?

Plywood outperforms all other panels on the market:

· Highly Stable
· Stronger & Lightweight
· Impact Resistant
· Proven Performance
· Environmentally Responsible
· Value Added

Plywood Technical Data

Plywood Engineering Properties and Design Values

 

Need Plywood? Get a Quote Direct from CANPLY Mills

Use the Plywood Enquiry Form to obtain a quote from CANPLY Member Companies.

Note: A minimum order of 20 bundles is required. Click here

 


Patented EASY T&G - Roof

EASY T&G - Roof

Characteristics:

Milled with a precision-engineered edge profile for easy installation and edge support without H-Clips.

Applications:

Roof sheathing and decking for residential, commercial, and industrial construction.

 

CANPLY EASY T&G is considered Canada's "standard" in plywood tongue and groove products. With over 25 years of proven performance, the precision-engineered dimensions of EASY T&G's tongue and groove are designed to:

  • Enable fast, problem-free installation
  • Prevent buckling by accommodating panel expansion due to moisture changes
  • Prevent wedging action that exert damaging splitting forces
  • Accommodate field applied adhesives
  • Provide a uniform, ridge-free surface
Species
Douglas Fir (FIR) CSA O121-DFP
Canadian Softwood (SPF) CSA O151 - CSP
Grades
Select Tight Face
(SEL TF)
Select (SEL)
Sheathing (SHG)
Thickness
11 mm - 7/16"
12.5 mm - 1/2"
Dimensions
Lengths up to 2500 mm (8'-2")
Widths from 600 mm to 1250 mm
(2' to 4'-1")

Go to EASY T&G FLOOR

Download the EASY T&G Market Advisory

Download EASY T&G Literature

Easy T&G Roof Installation Tips

  1. Maintain Proper Gaps Between Panels.
    Do Not Force Tightly Toghether!
  2. Lay panels with face grain across the joist.
  3. For increased weather-proofing install panels with tongue pointing up.

  4. Maintain Proper Fastener Spacing.
  5. Space fasteners 150mm (6") around the perimeter of the panel and 300mm (12") on intermediate supports.

    For thickness of 12.5 mm, code approved fasteners include 51 mm common or spiral nails, 51 mm staples and 45 mm ring thread nails or screws.

 

Storage and Handling

The EASY T&G profiles are sturdily built and designed to engage even when wet. But dry, undamaged panels install faster and easier, so maximize the time you can save by following these suggestions on the job site:

  • Cover plywood bundles with plastic or tarp.
  • Use three supports as dunnage to prevent sagging.
  • Do not mix CANPLY EASY T&G with other T&G's.