EXTERIOR DFP :Sanded Grades

Good Two Sides

Characteristics:

Sanded. Best appearance both faces. May contain neat wood patches, inlays or synthetic patching material.

Typical Applications:

Furniture,cabinet doors, partitions, shelving, concrete forms and opaque paint finishes.

Look for our "Mark of Excellence"

The CANPLY "Mark of Excellence" is an assurance to consumers that our plywood meets the high quality standards established by the industry and that it will perform in a satisfactory and predictable manner. Only plywood manufactured by member companies of CANPLY are licensed to use this stamp.

CANPLY Assurance of Quality:

CANPLY member companies warrant their certified plywood against manufacturing defects including delamination. Please see specific manufacturer's warranty for details.

Need Plywood? Get a Quote Direct from CANPLY Mills

Use the Plywood Enquiry Form to obtain a quote from CANPLY Member Companies.

Note: A minimum order of 20 bundles is required. Click here

 

 

 

Plywood Grades Veneer Grades
  Face Inner
Plies		 Back
Sanded
Good Two Sides A C A
Good One Side A C C
Unsanded
Select Tight Face
(SEL TF)		 B* C C
Select (SEL) B C C
Sheathing (SHG) C C C
Overlaid
Medium Density Two Sides (MDO2) C* C C*
Medium Density One Side (MDO1) C* C C

For further details of veneer grade descriptions, refer to CSA Standard O121-M1978
* Permissible openings filled.

Sizes & Thicknesses CANPLY EXTERIOR Plywood

Thicknesses Sizes
Sanded Sheathing

Lengths
Available up to 2500 mm

Widths
Available from 600 mm to 1250 mm

For EASY T&G panels, deduct 15 mm from the nominal width for net face coverage.

6 mm
8 mm
11 mm
14 mm
17 mm*
19 mm*
21 mm*
24 mm*
27 mm*
30 mm*

7.5mm
9.5 mm
11 mm*
12.5 mm*
15.5 mm*
18.5 mm*
20.5 mm*
22.5 mm*
25.5 mm*
28.5 mm*
31.5 mm*

All thicknesses are metric, but some approximate imperial dimensions eg 6mm (1/4 in.)
* Available as square edge or with EASY T&G edge.

Note: CANPLY EXTERIOR plywood panels are available in additional sizes and thicknesses on special order.